Instant electric geysers have become an essential appliance in many households due to their efficiency in heating water on demand. However, like any other appliance, they can encounter issues that disrupt their functionality. This article will guide you through four quick methods to fix your instant electric geyser, ensuring that it continues to provide you with a steady supply of hot water.
Understanding the Instant Electric Geyser
Before diving into the solutions, it’s helpful to understand how an instant electric geyser works. Unlike traditional storage water heaters, an instant electric geyser heats water only when it is needed.
When you turn on the tap, cold water flows through the unit, where it is rapidly heated by an electric element. The heated water then flows directly out to your faucet. Because of this on-demand heating process, instant electric geysers are more energy-efficient and provide endless hot water, but they also have unique issues that require specific troubleshooting techniques.
Top 4 Methods to Fix Instant Electric Geyser
Method 1: Fixing No Hot Water Issue
One of the most common problems with instant electric geysers is the lack of hot water. If you turn on your geyser and only cold water comes out, the issue could be related to the power supply, the heating element, or the thermostat.
Firstly, check if the geyser is receiving power. Ensure that the circuit breaker is not tripped and that the geyser’s switch is turned on. If the geyser has a digital display, it should light up, indicating that it is powered.
If the geyser is receiving power but still not heating water, the problem might be with the heating element. The heating element can wear out over time and may need to be replaced. To inspect the heating element, you will need to turn off the power to the geyser, remove the access panel, and use a multimeter to check for continuity. If the multimeter shows that the element is not working, it will require some repair services.
Another possible cause of this issue could be the thermostat. The thermostat regulates the temperature of the water by controlling the heating element. If it malfunctions, the water may not heat properly. To check the thermostat, you can use a multimeter to test it. If the thermostat is faulty, replacing it should restore the geyser’s ability to heat water.
Method 2: Resolving Water Temperature Fluctuations
If your instant electric geyser is producing water that is either too hot, too cold, or fluctuates between the two, the problem could lie in the thermostat settings, a faulty sensor, or an issue with water flow.
Start by checking the thermostat settings. Instant electric geysers usually have an adjustable thermostat that allows you to set the desired water temperature. If the thermostat is set too high, the water will be scalding hot. If it’s set too low, the water won’t be warm enough. Adjust the thermostat to a moderate temperature, usually between 49°C to 60°C, and see if this resolves the issue.
If adjusting the thermostat does not fix the problem, the issue might be with the temperature sensor. The sensor communicates with the thermostat and heating element to maintain a consistent water temperature. If it malfunctions, the water temperature can become erratic. Replacing the faulty sensor should fix this problem.
Method 3: Addressing Leaks in the Instant Electric Geyser
Leaks are another common issue with instant electric geysers. A leaking geyser not only wastes water but can also cause significant damage to your home if not addressed promptly. The first step in fixing a leak is to identify its source.
If the leak is coming from the cold water inlet or hot water outlet, the problem might be with the connections. Over time, the fittings can become loose or corroded. Turn off the water supply, and then use a wrench to tighten the connections. If tightening doesn’t stop the leak, you may need to replace the fittings.
If the valve is leaking, it could be due to excessive pressure or a faulty valve. To check the pressure, you can use a pressure gauge. If the pressure is too high, you may need to install a pressure-reducing valve. If the pressure is normal, but the valve continues to leak, replacing the valve is necessary.
Method 4: Dealing with Strange Noises
Another issue that you may encounter with your instant electric geyser is strange noises, such as popping, hissing, or banging sounds. These noises are often caused by mineral buildup, trapped air, or issues with the heating element. You can easily avoid the issue in the first place with regular geyser maintenance.
Over time, minerals in the water can accumulate on the heating element or inside the tank, leading to a popping or hissing sound when the geyser is in use. To resolve this, you can flush the geyser to remove the mineral buildup. This involves turning off the power, draining the geyser, and then refilling it with fresh water to flush out the minerals.
Trapped air in the system can also cause noise. This is often the result of air pockets in the water line. To fix this, you can bleed the air from the system by turning on all the hot water taps in your home and letting them run until the noise stops.
If the noise persists after addressing these issues, the heating element might be loose or damaged. In this case, turn off the power to the geyser, open the access panel, and inspect the element. If it is loose, tighten it. If it is damaged, replace it.
Conclusion
Fixing an instant electric geyser can seem daunting, but with a little knowledge and some basic tools, many common issues can be resolved quickly. By following these steps, you can ensure that your instant electric geyser continues to provide reliable hot water for years to come.
However, to have a better repair of your instant electric geyser, contact Reliant Solutions. We are the top home appliances repair company in Pakistan, also offer quick and affordable geyser repairs. Just hit the call button as soon as you notice any inconsistency in your geyser.